Daiki Rika Kogyo Co., Ltd.
HOME > DIK-2610
DIK-2610  Automatic mill and sieve for Soil

DIK-2610 Dust Shield Automatic Mill and Screen for Soil Main Characteristic

ECrushing and the sieving of the soil of ƒΣ2mm or less can be done at the same time.

EAll the processes can be done without putting out dust at all. Therefore, there is no worry of the health hazard by inhaling dust.

EThere is no soil dust go out from equipment, so the dust collector is unnecessary.

ESince this equipment is compact design, it is possible to set up them in the most of laboratory.

EBecause all the process are done in the airtight container, the cleaning time will be greatly reduced. It is used to taking long time to clean up soil dust more than the crushing and the sieving of the soil samples.

EWorking hours can be shortened, and it correspond to a large amount of sample processing by improving the working efficiency of crushing and the riddle division process.


Specification
Outside Dimensions W750~D670~H700mm   (Exclude projyection)
Weight 160kg
Operation  time 30`120 sec
Adjustable speed 10`80 rpm/s
Power supply AC100V max2.5A
Processing capacity Air dried soil 150g (container) ~4=600g
   



Crushing rodDIK-2610 Crushing rod

To raise the crushing efficiency,the crushing rods are made of high density molybdenum.

It is covered with polypropylene capsule prevent crushing stones in the soil sample.


The sample crushing cotainer (made of the polypropylene) is an assembly type with double layer construction.

The dust will not go out outside of the container during the crushing sieving in the device.

The soil correction coutainer can be used for sample keeping with lid.
Completely assembled sample container Soil correction container with lid
DIK-2610  Soil correction container with lid
footer.htm